Upgrade your culinary workspace with the Water Creation SSSG-US-3219A Rectangular Zero Radius 1 Bowl Kitchen Sink, engineered for busy home cooks who demand professional performance. Measuring 32 inches by 19 inches with a generous 10-inch depth, this undermount stainless steel sink offers ample room for large pots, pans, and baking sheets. Built to last through years of heavy meal preparation, it brings both durability and a striking modern look to contemporary kitchens.
Crafted from premium 18-gauge T-304 stainless steel, this single bowl sink features a commercial grade satin finish that resists everyday scratching and wear. The crisp zero radius corners deliver a sharp, architectural aesthetic, while integrated bottom drain grooves efficiently channel water toward the rear center drain to prevent pooling. Fully coated underneath and equipped with heavy duty sound deadening pads, it keeps kitchen noise to a minimum while you wash dishes.
Designed specifically for seamless undermount installation, this model integrates cleanly into your countertop for an effortless wipe-down cleanup experience. Whether you are remodeling a bustling family kitchen or designing a sleek entertainment space, this sink delivers reliable everyday utility. Complete with necessary mounting fasteners and a cutout template, it makes professional-grade kitchen functionality accessible for your next home improvement project.
Perfect For
Modern kitchen remodels focusing on clean lines and undermount configurations
Home cooks who frequently wash large pots, baking sheets, and oversized cookware
Households seeking a quieter kitchen environment through sound-dampened sink construction
Open-concept kitchens where sink aesthetics and modern zero radius styling are visible
Renovations incorporating standard garbage disposal units via a 3.5-inch drain opening
Cooks who prefer deep single basin functionality over divided double compartments
Undermount Single Bowl Design Delivers a seamless transition from countertop to basin for effortless cleaning and a clean aesthetic.
Premium T-304 Stainless Steel Provides durable 18-gauge construction that resists rust, corrosion, and staining over time.
Zero Radius Corners Offers an ultra-modern square 90-degree corner profile for a sharp, architectural look.
Heavy Duty Sound Deadening Features thick padding underneath the basin to significantly reduce clattering noises from dishes and water flow.
Commercial Grade Satin Finish Delivers a resilient surface that withstands daily kitchen activity while maintaining its sheen.
Optimized Drainage Grooves Channels water efficiently toward the standard 3.5-inch drain opening to prevent standing water in the basin.
Installation Guide
Use the included cutout template to carefully mark and cut your countertop material to match the inner dimensions of the undermount basin.
Apply a continuous bead of high-grade silicone sealant around the top rim of the sink before pressing it firmly against the underside of the countertop.
Secure the sink in place using the supplied mounting fasteners, tightening them evenly around the perimeter to ensure a flush, watertight seal.
Connect your plumbing lines and standard garbage disposal system to the 3.5-inch drain opening following local plumbing codes.
Care & Maintenance
Daily Cleaning Rinse the sink thoroughly after each use and wipe dry with a soft cloth to prevent water spot accumulation.
Surface Scrubbing Clean the 18-gauge stainless steel using a mild dish soap and a non-abrasive sponge, rubbing in the direction of the satin finish grain lines.
Stain Prevention Avoid leaving wet cast iron cookware or harsh chemical bleach sitting on the surface for extended periods to protect the finish.
Scratched Surfaces Buff out minor surface abrasions gently using a specialized stainless steel cleaner and a non-scratch scouring pad along the grain.
Mineral Deposits Remove occasional hard water buildup by applying a solution of equal parts white vinegar and water, then rinsing thoroughly.
FAQ
Q: What are the overall dimensions of the sink?
The sink measures 32 inches wide by 19 inches back to front, with an overall height and depth of 10 inches.
Q: What are the inner bowl dimensions?
The inner bowl measures 30 inches wide by 17 inches back to front with a 10-inch depth.
Q: Is this sink compatible with garbage disposals?
Yes, it features a standard 3.5-inch drain opening that fits most common garbage disposal systems.
Q: What material is the sink made from?
It is constructed from premium 18-gauge T-304 stainless steel.
Q: Does the sink come with installation hardware?
Yes, it is supplied with mounting fasteners and a cutout template to assist with installation.
Q: What type of installation is required?
This model requires an undermount installation configuration.
Q: Does this sink feature sound-dampening qualities?
Yes, it includes heavy-duty sound-deadening pads on the underside and is fully coated for maximum protection.
Q: Are faucet holes pre-drilled into this sink?
No, there are zero faucet holes drilled into the sink, as it is designed for countertop or wall-mounted faucet installations.
Q: What is the corner style of the basin?
It features a zero-radius corner design with sharp 90-degree angles for a modern aesthetic.
Why This Is the Right Choice
Lasting Durability Constructed from robust 18-gauge T-304 stainless steel to ensure dependable performance through years of heavy kitchen use.
Quiet Operation Equipped with heavy duty sound deadening pads that absorb vibration and dampen the loud echoes typical of metal sinks.
Streamlined Installation Supplied with mounting fasteners and a precise cutout template to make undermount setup straightforward for installers.
Disposal Compatibility Features a standard 3.5-inch drain opening designed to fit most common garbage disposal systems without modification.
