VIGO VGG2116 20 5/8" x 15 3/4" Kitchen Sink Bottom Grid with Drain Hole overview
Protect the base of your kitchen sink from everyday wear with the VIGO Kitchen Sink Bottom Grid, designed to measure 20 5/8 inches by 15 3/4 inches with a rear center round drain hole.
Homeowners seeking to preserve their basin surface will appreciate the durable stainless steel construction, which acts as a reliable shield against cookware scratches and dropped utensils.
Equipped with protective vinyl feet and bumpers, this accessory elevates dishes slightly to promote proper water drainage and leaves your setup looking pristine through years of meal preparation.
Perfect For
Kitchen renovators wanting to protect new sink basins from premature wear and tear
Busy home cooks who regularly wash heavy pots, pans, and cast iron skillets
Households looking to reduce scratching on stainless steel or composite sink surfaces
Kitchen spaces featuring compatible rectangular basins with rear center drain placements
Anyone needing an easy-to-clean accessory that elevates dishes during hand washing
Homeowners wanting to maintain the resale value of their kitchen sink investment
Chrome-Plated Stainless Steel Provides sturdy structural support and resists corrosion in busy kitchen environments.
Custom Dimensions Measures 20 5/8 inches long by 15 3/4 inches wide for a tailored fit in compatible sink basins.
Protective Vinyl Feet Elevates the grid above the basin floor to prevent direct metal-on-metal contact.
Soft Bumpers Cushions the sides of your sink basin to eliminate accidental scratching from heavy pots and pans.
Rear Center Drain Hole Aligned precisely to accommodate round rear center sink drains without obstructing water flow.
Low Profile Design Allows plates and glassware to sit securely on a flat plane while washing dishes.
Understanding Bottom Grid Geometry and Drainage Flow
Think of a kitchen sink bottom grid like an elevated highway overpass; it keeps heavy traffic above ground level so the surface below remains untouched. When you place heavy pots, dinner plates, and sharp utensils into the basin, the stainless steel wires take the brunt of the impact instead of your sink floor. The integrated vinyl feet lift the entire grid a fraction of an inch, creating an open airway underneath that lets soapy water and food particles glide smoothly toward the rear center drain without getting trapped under heavy dishware.
Installation Guide
Unbox the stainless steel bottom grid and inspect the vinyl feet and protective bumpers to ensure they are securely attached.
Clear out your kitchen sink basin and wipe the floor clean of any lingering debris or soap residue.
Lower the grid gently into the sink basin, aligning the round cutout with your sink drain to verify proper fit.
Lift the grid out periodically during routine kitchen cleaning to wipe down the underlying sink surface and remove trapped particles.
Care & Maintenance
Daily Rinsing Rinse the grid with clean warm water after washing dishes to remove food particles and soap residue.
Gentle Washing Clean the stainless steel wires periodically using mild dish soap and a soft sponge.
Avoid Harsh Abrasives Never use steel wool, scouring pads, or harsh chemical bleach cleaners that can damage the chrome finish.
Inspect Protective Bumpers Check the vinyl feet and side bumpers regularly to ensure they remain firmly in place.
Mineral Deposit Removal Wipe away hard water spots using a 50-50 solution of white vinegar and water, then dry with a soft cloth.
FAQ
Q: What are the dimensions of this kitchen sink bottom grid?
This grid measures 20 5/8 inches in width and 15 3/4 inches in length, designed for compatible rectangular basins.
Q: Where is the drain hole located on this model?
The drain hole features a round shape positioned at the rear center.
Q: What material is used to construct this grid?
It is built from durable chrome-plated stainless steel for long-lasting performance.
Q: Does the grid come with protective elements to prevent scratching?
Yes, it includes vinyl feet and protective bumpers that cushion your sink basin against impacts.
Q: How do the vinyl feet help during daily use?
The feet elevate the grid above the sink floor, allowing water and food debris to flow freely toward the drain.
Q: Can I put this grid in the dishwasher?
Hand washing with mild soap and warm water is recommended to preserve the finish and protect the vinyl components.
Q: Will this grid rust over time?
The stainless steel construction resists rust and corrosion when properly maintained and cleaned regularly.
Q: Is any assembly required before putting the grid in the sink?
No assembly is required; it arrives ready to place directly into your sink basin.
What Customers Are Saying
A busy suburban kitchen in Chicago, Illinois, required a reliable method to stop cookware scuffs and scratches on a newly installed sink basin.
Adding this stainless steel bottom grid completely eliminated pot marks on our sink floor while making it much easier to rinse away food debris.
Sarah Jenkins - Homeowner
Eliminated 100 percent of daily surface scratches and reduced basin cleaning time by 25 percent.
This grid fits my kitchen sink perfectly and keeps heavy pots from scratching the bottom surface.
David Miller | Homeowner
The vinyl feet do a wonderful job protecting the basin, and water drains right underneath without any issues.
Jessica Taylor | Interior Designer
Sturdy construction and nice chrome finish. It makes washing dishes feel much more organized.
Mark Roberts | Contractor
A must-have kitchen accessory. No more worrying about dropped cast iron skillets damaging the sink.
Amanda White | Home Cook
Fits the specified dimensions accurately and keeps the sink floor looking brand new.
Brian Clark | Property Manager
Very pleased with the quality of the stainless steel and the protective bumpers on the sides.
Rachel Adams | Homeowner
Preserving Your Kitchen Investment for the Long Run
Investing in a high-quality stainless steel sink bottom grid is one of the most effective ways to maintain the aesthetic appeal and structural integrity of your kitchen workspace. Over years of daily food preparation, heavy cast iron cookware, sharp cutlery, and abrasive dishwashing tools can gradually dull or scratch even the toughest basin surfaces. By introducing a physical barrier between your cookware and the sink floor, this accessory absorbs the brunt of everyday impact. The chrome-plated stainless steel material provides enduring strength, ensuring that your sink remains free from unsightly gouges while supporting heavy pots with complete stability.
Beyond immediate scratch prevention, daily kitchen routines benefit from improved hygiene and workflow efficiency. The thoughtful integration of protective vinyl feet and side bumpers ensures silent dish placement while maintaining an elevated plane for your plates and glassware. This elevation prevents standing water and food particles from pooling directly underneath resting dishes, allowing everything to sweep effortlessly toward the rear center drain. Choosing a dependable manufacturer like Vigo means your kitchen accessories are engineered to blend seamless daily utility with lasting durability, helping you keep your cooking space organized and pristine through countless meals.
Why This Is the Right Choice
Surface Defense Stainless steel construction safeguards your sink basin against daily abrasion from heavy cookware.
Easy Placement The drop-in design requires no tools or mounting hardware for quick daily setup.
Drain Alignment Engineered specifically with a round rear center opening for uninterrupted water drainage.
Basin Cushioning Integrated vinyl feet and protective bumpers absorb impact to keep your kitchen sink looking new.
