Upgrade your culinary space with the Kraus KWT310-28 Kore series 28-inch stainless steel single bowl kitchen sink, engineered for homeowners who value both performance and efficient design. This workstation sink features an integrated ledge to support custom sliding accessories, transforming your daily meal prep and cleanup into a streamlined experience. Crafted from heavy-duty 16-gauge stainless steel with sound-dampening pads, it offers lasting durability alongside an ultra-quiet kitchen environment. Discover how this versatile single bowl solution enhances your kitchen workflow while adding a sleek, professional aesthetic to your countertops.
Perfect For
Home cooks looking to maximize prep space in medium to large kitchen layouts
Modern kitchen remodels requiring a durable 16-gauge stainless steel workstation sink
Open-concept kitchens where minimizing sink clatter and noise is a priority
Upgrades requiring a spacious 28-inch drop-in or undermount single bowl configuration
Busy households that need extra cabinet storage underneath via an offset drain placement
Renovations featuring solid surface countertops that benefit from a clean, wear-resistant finish
Heavy-Duty 16 Gauge Steel Construction Constructed from ultra-durable KRAUS TRU16 stainless steel for superior resistance to dents and everyday damage.
Integrated Workstation Ledge Features a built-in tier to support sliding accessories, letting you work right over the sink without cluttering your counters.
Ultra-Quiet Sound Dampening Equipped with thick NoiseDefend technology pads on all sides to absorb noise and vibration from dishes.
Spacious Single Bowl Design Provides a generous 26-inch by 16-inch inner workspace with a 9-inch depth to easily accommodate large cookware and heavy stacks of dishes.
Rear Offset Drain Placement Positioned toward the back to create an uninterrupted work surface and increase usable storage space in your base cabinet.
Easy-Clean Wear-Resistant Finish Designed to resist corrosion and feature rounded bottom corners that help prevent long-term debris buildup.
Installation Guide
Measure your minimum 30-inch cabinet base and countertop cutout dimensions of 28 inches by 22 inches carefully prior to final installation.
Set the 4mm mounting deck flat against the countertop surface, ensuring a tight seal for your chosen above-mount configuration.
Connect the 3.5-inch rear offset drain assembly securely to your plumbing lines, ensuring proper alignment to maximize lower cabinet storage.
Rinse the stainless steel single bowl thoroughly after initial setup to clear away any installation debris.
Care & Maintenance
Daily Cleaning Wipe down the stainless steel surface with a mild soap and warm water solution after every use.
Rinsing Always rinse the sink thoroughly after using liquid dish soaps or harsh cleaning agents to prevent surface film.
Drying Towel-dry the bowl with a soft cloth after cleaning to prevent water spots and maintain the wear-resistant finish.
Grid Maintenance Periodically remove the included stainless steel bottom grid to clean underneath and prevent mineral accumulation.
Stain Prevention Avoid leaving wet cast-iron cookware or corrosive chemicals sitting on the sink surface for extended periods.
FAQ
Q: What are the outer dimensions of the sink?
The outer dimensions measure 28 inches long by 22 inches wide with a height of 9.5 inches.
Q: What is the minimum required cabinet size?
This model requires a minimum cabinet size of 30 inches for proper installation.
Q: What gauge of stainless steel is used?
It is constructed from ultra-durable KRAUS TRU16, which is the thickest 16-gauge stainless steel.
Q: Does this sink include any accessories?
Yes, it includes a heavy-duty cutting board, roll-up dish rack, protective stainless steel bottom grid, and a drain assembly with a matching cover.
Q: Where is the drain located?
The drain features a rear offset placement on the right side to maximize usable workspace and under-sink storage.
Q: What are the inner bowl dimensions?
The inner bowl measures 26 inches long by 16 inches wide with a depth of 9 inches.
Q: What type of installation does this sink support?
This versatile model is designed for above-mount or drop-in installation styles.
Q: How does the workstation feature work?
An integrated ledge supports sliding accessories like cutting boards, allowing you to work directly over the sink basin.
Why This Is the Right Choice
Exceptional Durability Built using thick 16-gauge stainless steel to withstand the rigorous demands of a busy kitchen.
Optimized Drainage Features channel grooves and a sloped bottom paired with a rear offset drain for quick, efficient water flow.
Sound Absorption Integrated NoiseDefend pads drastically reduce clattering sounds and vibrations during food preparation and cleanup.
Multifunctional Workspace The integrated ledge transforms the single bowl into a complete prep station with included accessories.
