Dreamline DL-6973R-FR Frosted Shower Door and 36" by 60" Base Right Drain overview
Upgrade your bathroom with the DreamLine Infinity-Z sliding frosted shower door and SlimLine shower base kit, engineered specifically for streamlined bathroom renovations and tub-to-shower conversions. This complete setup pairs a smooth sliding glass door with a low profile 36 by 60 inch single threshold shower base featuring a convenient right hand drain. Homeowners and contractors looking for a dependable and stylish bathing solution will appreciate the combination of ANSI certified tempered glass and a sturdy acrylic fiberglass reinforced base.
Designed to fit alcoves measuring 56 to 60 inches wide and 72 inches high, this sliding enclosure offers flexible width adjustability and up to one inch of out-of-plumb adjustment per side. The frameless glass sliding mechanism includes an integrated towel bar on the stationary panel for added everyday convenience. Anodized aluminum guide rails and profiles ensure long lasting structural integrity while maintaining a bright, modern appearance in your space.
Transform your daily routine with a cohesive shower package that delivers both reliable water containment and contemporary style. The integrated tile flange on the SlimLine base simplifies waterproofing during setup, helping protect your subfloor against moisture. Enjoy a secure, comfortable walk-in entry and a polished aesthetic that instantly elevates any residential bathroom design.
Understanding Out-of-Plumb Adjustability in Frameless Glass Doors
Older homes often settle over time, causing walls to drift slightly out of vertical alignment, known as out-of-plumb. Installing a rigid glass panel against a crooked wall can lead to gaps, leaks, or inability to latch the door properly. The wall profiles on this enclosure are engineered with up to one inch of adjustability per side, acting like a sliding sleeve that absorbs minor wall angles. This allows the aluminum channel to anchor plumb against the wall while the glass remains perfectly aligned, ensuring a watertight seal and smooth sliding operation without custom glass cutting.
Installation Guide
Ensure your alcove framing is square, plumb, and meets the exact finished opening dimensions of 56 to 60 inches wide before starting assembly.
Install the SlimLine shower base directly onto a leveled subfloor, securing the integrated tile flange to the wall studs to prevent movement.
Measure and cut the aluminum top and bottom guide rails carefully if your finished opening is less than 60 inches wide.
Seal all perimeter joints between the shower base, walls, and glass profiles with high quality silicone caulk after complete installation and curing.
Care & Maintenance
Daily Rinsing: Spray down the frosted glass panels and shower base with clean warm water after every use to wash away soap residue.
Glass Cleaning: Wipe the 1/4 inch tempered glass with a soft microfiber cloth and a mild non-abrasive glass cleaner to maintain clarity.
Base Maintenance: Clean the acrylic fiberglass reinforced shower base using a soft sponge and mild liquid dish soap or specialized acrylic cleaner.
Avoid Harsh Chemicals: Never use abrasive scouring powders, steel wool, or harsh acid-based chemicals that can scratch the glass or dull the aluminum finish.
Hardware Care: Dry the anodized aluminum guide rails and towel bar periodically with a clean towel to prevent water spotting.
FAQ
Q: What size finished alcove does this shower kit fit?
This kit is designed to fit finished wall-to-wall alcove openings measuring 56 to 60 inches wide with a minimum height requirement of 74 3/4 inches.
Q: Is the shower drain included with the base?
No, the drain is not included and must be purchased separately to match your plumbing requirements.
Q: Which side is the shower base drain located on?
The SlimLine shower base features a right hand drain placement.
Q: What type of glass is used in the sliding door?
The enclosure utilizes 1/4 inch thick ANSI certified frosted tempered glass for privacy and safety.
Q: Can the top and bottom guide rails be cut to size?
Yes, the aluminum top and bottom guide rails can be shortened by cutting up to 4 inches during installation to fit narrower openings.
Q: Does the shower door include a handle or towel bar?
The stationary glass panel features a convenient exterior towel bar that also serves as a sturdy handle.
Q: What materials make up the shower base?
The SlimLine shower base is constructed from durable acrylic reinforced with fiberglass for long lasting structural support.
Q: Does this kit include back walls?
No, back walls are not included, allowing you to finish your shower alcove with your choice of tile or wall panels.
What Customers Are Saying
A homeowner in Austin, Texas replaced an outdated acrylic bathtub with this Dreamline kit to modernize their primary bathroom layout.
The frosted glass gives us total privacy while making the room feel so much brighter, and the sliding door glides effortlessly every single day.
David M. - Homeowner
Successfully completed a full bathroom upgrade with improved accessibility and modern aesthetics.
Transformed our guest bathroom completely. The frosted glass is gorgeous and provides great privacy.
Sarah L. | Interior Designer
The low profile shower base made the transition so easy during our tub removal project. Highly recommend.
Mark R. | General Contractor
Very solid construction. The sliding door moves smoothly along the guide rails without any sticking.
Jessica T. | Homeowner
Having the matching base and door in one kit saved us so much time matching dimensions during our remodel.
Brian K. | Property Manager
The exterior towel bar is a fantastic touch for keeping towels handy right outside the enclosure.
Amanda W. | Homeowner
Investing in Lasting Quality for Your Bath Space
Choosing a coordinated shower enclosure kit simplifies the entire renovation process by ensuring that the sliding door and acrylic base are engineered to work together seamlessly. The combination of resilient anodized aluminum profiles and ANSI certified tempered glass creates a robust bathing structure designed to withstand daily family use without losing its structural integrity or visual appeal. By eliminating guesswork regarding component compatibility, this matched kit helps prevent common installation headaches and provides peace of mind for years to come.
Beyond everyday functionality, upgrading to a modern sliding glass door and low profile shower base contributes to a cleaner, more hygienic bathroom environment. The smooth glass surfaces and integrated tile flange minimize hard-to-reach crevices where moisture and soap scum typically accumulate, making routine cleaning faster and more effective. Whether you are modernizing a guest bathroom or completing a master suite overhaul, this thoughtfully designed shower package delivers enduring value, reliable water containment, and timeless style.
