Dreamline DL-6972C-CL Clear Shower Door and 34" by 60" Base Center Drain overview
Upgrade your bathroom with the DreamLine Infinity-Z sliding shower door and SlimLine single threshold shower base kit, designed specifically for streamlined home renovations and tub-to-shower conversions. This complete matching set brings together ANSI-certified tempered glass and a low profile base to create a spacious, modern showering area that fits seamlessly into your layout. Homeowners and contractors looking for reliable quality and a clean aesthetic will appreciate the thoughtful engineering behind every component. Transform your daily routine with this efficient, elegant shower enclosure solution built for lasting performance.
Complete shower kit Includes the Infinity-Z sliding shower door and a matching 34 in. by 60 in. single threshold shower base for a coordinated renovation project.
Tempered glass panels Built with 1/4 inch clear ANSI-certified safety glass for durability and peace of mind during daily use.
Width adjustability Offers 56 to 60 inches of finished opening width and up to 1 inch of out-of-plumb adjustability per side for flexible fitting.
Integrated towel bar Features a convenient towel bar on the exterior stationary panel that doubles as an easy-to-reach handle.
Low profile base The SlimLine shower base provides a sleek modern look with an integrated tile flange for straightforward waterproofing.
Robust framing Designed with anodized aluminum profiles and guide rails that can be shortened by up to 4 inches during setup.
Understanding Out-of-Plumb Adjustability in Frameless Glass Doors
When installing a shower enclosure, walls in older or even newly constructed homes are rarely perfectly vertical. Out-of-plumb refers to the slight vertical lean of a wall. The DreamLine Infinity-Z features specialized wall profiles that allow up to 1 inch of lateral adjustability per side, acting much like a sliding wedge system. This engineering allows the glass panels to sit plumb and flush even if your bathroom studs are slightly misaligned, preventing gaps and ensuring the sliding door closes securely every time.
Installation Guide
Verify that your finished alcove opening measures between 56 and 60 inches wide and meets the 72-inch door height requirement before beginning assembly.
Ensure the subfloor is level and properly framed to support the 34 by 60 inch single threshold shower base with a center drain configuration.
Use the integrated tile flange on the shower base to secure a watertight seal against the wall studs prior to installing wallboard or tile.
Trim the top and bottom aluminum guide rails by up to 4 inches if your specific opening width requires a customized shorter fit.
Care & Maintenance
Daily Rinsing Spray down the clear glass panels and shower base with clean water after each use to wash away soap residue.
Glass Cleaning Use a soft squeegee or microfiber cloth along with a mild, non-abrasive glass cleaner to maintain sparkling transparency.
Frame Care Wipe down the anodized aluminum profiles and guide rails with a damp cloth and mild soap, avoiding harsh chemical solvents.
Hardware Maintenance Check the sliding door rollers and towel bar fasteners periodically to ensure they remain snug and secure.
Prevent Buildup Avoid using abrasive scouring pads or powdered cleansers that could scratch the tempered glass or aluminum finish.
FAQ
Q: What is included in this shower kit?
A: This kit includes the Infinity-Z sliding shower door and a matching 34 in. by 60 in. single threshold shower base with a center drain.
Q: What is the glass thickness of the shower door?
A: The door features 1/4 inch (6 mm) clear tempered safety glass that is ANSI certified.
Q: Can the width of the shower door be adjusted during installation?
A: Yes, the door offers a width adjustability range of 56 to 60 inches and up to 1 inch of out-of-plumb adjustability per side.
Q: Are the guide rails able to be cut down to size?
A: Yes, the aluminum top and bottom guide rails can be shortened by cutting up to 4 inches to fit smaller alcove spaces within the 56 to 60 inch range.
Q: Does the shower base come with a drain?
A: No, the drain is not included with the shower base and must be purchased separately.
Q: Is the shower base cUPC certified?
A: Yes, the 34 in. x 60 in. single threshold shower base is cUPC certified for plumbing code compliance.
Q: Which side does the door open from?
A: The door features a reversible design, allowing for left or right-hand installation flexibility.
Q: Does the enclosure include back walls?
A: No, back walls are not included with this kit, allowing you to finish the interior walls with your choice of tile or panels.
What Customers Are Saying
A homeowner in Austin, Texas replaced an outdated acrylic tub enclosure with this DreamLine sliding door and base kit to modernize their main guest bathroom.
The sliding door glides smoothly, and having the matching base made the entire layout look cohesive and professionally installed. It completely updated our space without requiring a full structural redesign.
David Miller - Homeowner
Successfully converted a cramped tub alcove into an open, modern 60-inch shower space.
This matched set made our bathroom remodel so much easier. The glass door slides smoothly and the low profile base feels very sturdy.
Rachel Adams | Interior Designer
The out-of-plumb adjustability saved us during installation since our older walls were slightly uneven. Highly recommended for tub conversions.
Mark Thompson | General Contractor
Good quality glass and a nice clean look. The towel bar on the door is surprisingly useful for everyday convenience.
Sarah Jenkins | Homeowner
Everything arrived well packaged. The SlimLine base paired with the Infinity-Z door gave our guest bath a high end finish.
Kevin Vance | Property Investor
Solid construction and clear instructions. The integrated tile flange on the base made waterproofing much more straightforward.
Brian Cooper | DIY Remodeler
Investing in a Coordinated Shower Solution
Choosing a matched shower kit like the DreamLine Infinity-Z door and SlimLine base takes the guesswork out of bathroom renovations by ensuring that components are engineered to work together seamlessly. Coordinating your sliding glass door and shower tray prevents compatibility issues often encountered when mixing and matching different manufacturer brands. The robust anodized aluminum framing resists everyday moisture exposure, maintaining its structural integrity and appearance over years of frequent use. Furthermore, the 1/4 inch tempered glass provides a dependable safety barrier that stands up to the demands of active households while keeping the bathroom feeling open and airy.
Beyond immediate aesthetic appeal, this streamlined shower enclosure contributes to long-term home value and simplified daily upkeep. The low profile shower base eliminates the high step associated with traditional bathtubs, offering safer access for users of all ages while establishing a contemporary, minimalist aesthetic. By utilizing an integrated tile flange on the base, the assembly supports reliable waterproofing practices that protect subfloor areas from moisture infiltration. It is a practical, well-engineered upgrade that enhances both the function and visual flow of your daily bathing space for years to come.
Why This Is the Right Choice
Smart Sizing Flexibility Width adjustability and cut-to-fit guide rails ensure a precise fit for your specific alcove dimensions.
Certified Safety Glass Premium 1/4 inch thick tempered glass delivers dependable strength and impact resistance for busy households.
Low Profile Entry The matching center drain shower base creates an accessible, contemporary step-in height for comfortable bathing.
Coordinated Aesthetics Anodized aluminum framing and a built-in towel bar combine modern style with everyday practical convenience.
